1

speed

100 m/min

2

Stable production capacity

100-80 m/min or maximum number of stacked strips 6-10 per minute, both can only meet one of them

3

Finished product specification after unfolding (mm)

180 (+1, -3) X paper width

4

Finished product folding specification (mm)

90 (+3, -1) X paper width

5

Finished product height (mm)

50mm-135mm (folding height, not after packaging)

6

Overall structure

Wall panel structure

7

restart at

Using high-resolution encoder operation, counting is 100% accurate

8

folding mechanism

Vacuum adsorption folding

9

folding pattern

V-shaped staggered folding

10

Folding roller processing method

After quenching and tempering treatment, high-precision deep hole processing is used to ensure the rigidity and strength of each roller, and all are processed using CNC machining centers with G3.2 level dynamic balance to ensure the accuracy requirements of the folding roller during high-speed folding

11

Paper breaking folding roller

2 paper breaking folding rolls, with an average distribution of 3 to 4 paper breaking bottom knives (the number may vary depending on the specifications) on the rolls to ensure that each paper breaking length is 180 (+1, -3) mm, and there are regular vacuum adsorption holes arranged next to each bottom knife on the roll surface to adsorb the cut raw paper attached to the roll surface

12

There are 3-4 paper inserting knives and 3-4 folded V-grooves evenly distributed on the roller (the number may vary depending on the specifications), ensuring that the size of the folded raw paper is 90mm (+3, -1). There are also regular vacuum adsorption holes arranged next to each knife inserting knife and folded V-groove on the roller surface to adsorb the cut raw paper and attach it to the roller surface

13

Paper cutting bottom knife

All of them are processed with imported materials, and the bottom knife with suction hole structure ensures that the paper does not flip when broken at high speed, making the finished product more neat

14

Paper cutter

All are processed with imported materials and designed with spiral face knives to ensure the durability of the face knives

15

Paper breaking method

16

Paper guiding method

hand movement

17

Vacuum duct section

The on-site vacuum air duct piping and construction shall be handled by the buyer themselves

18

Machine Inching Function

Machine can select jog function

19

Machine main motor power (kW)

4KW

20

Machine vacuum pump power (kW)

22

21

Machine Power Requirements (V Hz)

Three phase 380v 50Hz

22

Control voltage (V)

24

23

Compressed air pressure (MPa)

≥0.6

23

Gas Consumption

1000 liters/shift

1

Maximum width of base paper (mm)

1400

2

Original paper diameter (mm)

<=¢1500

3

Unwinding speed (m/min)

＜130

4

Inner diameter of the core of the base paper roll

￠106.3mm

5

Overall structure

Wall panel frame type

6

Weight of base paper (t)

Max 0.8

7

Unwinding system

Sheet base belt paper feeding belt

8

Original paper alignment

MANUAL

9

Unwinding method

Clockwise unwinding

10

Paper threading method

Manual paper feeding

11

Paper breakage detection

Equipped with a paper breakage detection system, the entire machine is shut down in case of paper breakage, reducing waste of raw paper

12

power

1.5KW

13

Minimum air pressure requirements

0.6Mpa

14

Gas consumption

1000 liters/shift

15

Rear frame transmission mode

Independent motor drive

drive

16

Paper feeding belt

flat belt drive

17

Paper width adjustment

screw drive

other

17

protection

Protective cover for main transmission components

1

Stacking function

Using 4 servo controls, automatic stacking can be achieved

2

Stacked structure

Adopting a wall panel structure

3

Stacked sliding seat

All stacked sliding seats are equipped with imported linear bearings and adopt a dual shaft structure to ensure the stability of each stacked part

4

Main stacked workpieces

All aluminum alloys are processed using CNC machining centers to ensure the accuracy of stacking

5

Paper outlet baffle

All imported aluminum alloy processing is used to ensure that the paper output does not affect the separation effect

6

Pneumatic part of the stacking part

Using AIRTAC pneumatic components to ensure the accuracy of stacking

7

Sheet count tracking

Using high-precision encoders

8

Cascade sampling adjustment

Through touch screen settings, the number of samples can be adjusted 100% accurately (based on even samples)

9

Set the sampling range (sampling)

Two layers of 100-200 draw, three layers of 60-150 draw

10

Stacking Times

Maximum stacking times 10 times/minute

11

control mode

When stopping normally, the entire stack must be completed before stopping

13

Paper support component

Stainless steel is used to ensure the strength and rigidity of the semi-finished paper at high speeds

14

15

Stacking servo motor power (kW)

3+3+0.75+1.8=8.5

16

Compressed air pressure (MPa)

≥0.6

17

Gas Consumption

1000 liters/shift

18

Control voltage (V)

24