Several methods to deal with the failure of toilet paper rewinder in toilet paper processing equipment-Quanzhou toilet paper rewinder

I. What should I do if the punching knife breaks paper during the production of toilet paper rewinder-Quanzhou toilet paper rewinder

Solution: If there is broken paper, first check whether the bottom knife blade is too steep. If the bottom knife blade is too steep, please adjust its bottom handle to make the bottom knife blade fall down before running.

In addition, check whether white oil is injected into the felt above the upper blade. Please fill it with white oil, which can effectively solve this problem.

　　

Second, the toilet paper rewinder punches unevenly in the production process, and some places play well, but some places can't. What should I do?

Solution: First, check whether the adjustment of the punching bottom knife is balanced. If the two ends are not equal in height, adjust the control handles at both ends to make the lower end higher until the two ends are balanced.

Slowly rotate the piercing cutter shaft so that its blade is upward, and observe whether the blade is uniform. If there is any unevenness, please slowly grind the deep part of the blade with a grinding wheel, then idle for a period of time, and then observe the blade to see if it is uniform. If it is not uniform, grind it off in the above way until the hole is uniform. -Quanzhou toilet paper rewinder

　　

3. What is the reason why the toilet paper rewinder does not spray glue after rolling paper?

Solution: If the nozzle doesn't spray glue, it may be too small or the nozzle is broken. If the nozzle is normal, re-adjust the solenoid valve. If it doesn't work, the solenoid valve is broken and needs to be replaced!

　

4. What should the toilet paper rewinder do if the paper roll is too loose or too tight?

　　

Solution: When the paper roll is too loose, the paper roll is too loose because the pressure of the paper pressing shaft is too small. Adjusting the atmospheric pressure of the paper passing shaft to increase the pressure can solve this problem. If the paper roll is too tight, it is just the opposite.

　　

Five, toilet paper rewinder in rewinding the original paper transmission is too tight, resulting in the original paper fracture or loose phenomenon? -Quanzhou toilet paper rewinder

Solution: If the base paper is too tight, it is broken because the rewinding speed is too fast or the conveying speed is too slow, please adjust its conveying structure to adjust the pulley to the big end of the driving wheel (the small end of the driven wheel).

If the base paper is loose, it is caused by too slow rewinding speed or too fast conveying speed, and its adjustment method is opposite to the above adjustment.