How is a few rows of paper folding machines? --- Jiangsu extraction folding machine

Make sure the power input of this machine has been connected to the three-phase 380V, 50 Hz power supply.

Make sure the air source input port of this machine has been connected to a compressed air source of 6-8 kgf. Note: The intake pipe requires φ16 or more.

Ensure that no one is working on the machine, maintenance, maintenance, component replacement, etc., and unrelated to the boot have been away from the machine.

Open this machine. Note: When the first start operation, it must be idled for a period of time (approximately 15 minutes) to view the machine parts, make sure everything is normal to load the original paper. (You can omit the empty turn in the future.) --- Jiangsu extraction folding machine

Upload the original paper into the original paper. The specific step is to first turn the corresponding manual valve to remove the upper paper frame corresponding to the pneumatic bulk paper, place the original paper between the two upper paper brackets (Note to ensure the correct direction of the original paper), to the original paper The paper core puts on the original paper shaft and the original paper shaft and locks the original paper shaft when the original paper is raised, and the upper paper frame axis is just in the position of the original paper shaft. Finally, the manual valve is turned, so that the upper paper holder is stabilized on the original paper rack of the original paper under the action of the cylinder. After the original paper is uploaded to the original paper, the original paper shaft will sprain the original paper on the side of the two original paper frames, manually cautiously roll the original paper in the direction of the head, so that the original paper shaft is stabilized to the original paper axis card. --- Jiangsu extraction folding machine