What safety hazards should the slitting rewinder mainly pay attention to?---Quanzhou small plate paper slitting rewinder

Safety operating procedures for rewinders:

Start-up inspection and preparation

1. Confirm that the maintenance work has been completed, the equipment has been restored to perfection, and the maintenance personnel have moved away from the site.

2. Clean up all the debris on the working surface such as the walking platform, rack, operating table, equipment and so on, to ensure that the equipment and working surface are clean and tidy, and comprehensively check whether the equipment has the starting conditions. ---Quanzhou small plate paper slitting and rewinding machine

3. Check whether the instrument on the console and the air source pressure are normal.

4. Whether the paper edge duct is unobstructed.

5. Whether the pulper and slurry pump are operating normally, whether the white water pipe may be opened, and whether the water pipe is normal.

6. Whether the slitting is normal, and proofread the size.

7. Check whether the size of the paper core is qualified or not, and must be selected strictly before using the machine.

Start-up preparation

1. Turn on the rewinding hydraulic pulper and paper edge fan.

2. Press the crawl button to turn on the paper threading belt.

3. Tear the paper web into an arrow shape, from top to bottom from the operating side of the equipment, through the guide roller and arc roller, and enter the paper guide belt from below the slitting knife.

Follow-up preparation

1. Before booting, the boot signal must be sent out to confirm that it is correct before booting.

2. When unloading paper, turn the unloading rack to 90 degrees as a safety board, and no one is allowed to stand before and after the paper roll.

3. Concentrate your energy during operation and pay attention to observe the operating status of the equipment and the tension of the paper web. Twin rolls appear during the operation of the rewinder and must be shut down for processing. No one is allowed to jump over the safety railing of the rewinder.---Quanzhou Small Paper Slitting and Rewinding Machine

4. During the unloading process, no one is allowed to stay in the unsafe area of the unloading table.

5. Always check whether the photoelectric cell installed in the dangerous area of the rewinder is sensitive and intact to prevent accidents.

6. When using driving, strictly follow the "Safety Operation Regulations for Driving".

7. Operators are strictly prohibited to climb onto the frame or safety cover during operation, and are not allowed to lean or bend into the transmission part of the reel and other dangerous areas.

8. When the paper is taped, before the slitting knife stops rotating, the tape operation is not allowed. Pay attention to the paper threading operation, and your hands and clothes will be caught in the equipment and cause personal accidents.---Quanzhou Small Plate Paper Slitting and Rewinding Machine

9. You must have a high sense of responsibility for safety, concentration, and operation before starting the machine. When the machine is in operation, someone must be on the console and not leave the console at will to prevent accidents

10. It is strictly forbidden to deal with paper jam at the entrance of the bottom roller and use a shovel to scrape away the dirt on the roller area. If there is a problem in the process, it must be shut down and processed.

11. Do not grab the paper web when the rewinder is running

12. During the rewinding process, no one is allowed to enter the inside of the paper roll to prevent the paper from breaking and hurting people

13. Always keep the work site clean, and clean the floor oil and damaged paper in time to prevent slipping and hurting people. It is forbidden to use a broom to clean the equipment while the machine is running, so as to prevent accidents---Quanzhou small plate paper slitting and rewinding machine

14. When an abnormal shutdown occurs, the power supply must be cut off before processing; when restarting, people cannot be inside the rewinder

15. When checking the working status during operation, a dedicated person should be responsible

16. When starting after shutdown, make sure that there is no one in the rewinder before starting

17, The protective fence of the paper return rack must be intact, and no one is allowed to stand under the paper return rack

18. When the rewinder is shut down for maintenance, the safety switch must be turned off and a safety warning sign must be hung up. Whoever is listed will be delisted.

19. During the operation of the rewinder equipment, it is strictly forbidden to handle abnormalities and make no mistakes.

20. Pushing the paper roll must cooperate with the operator who completes the conveying line. The conveying line must be switched to manual mode and operated by a dedicated person. It is forbidden to push the paper roll in the automatic state. ---Quanzhou small plate paper slitting and rewinding machine

21. Push the paper roll one by one and then push the next one. Don't push the one in the front and another in the back to cause personal injury.

22. During the operation of the rewinder, the operator is not allowed to enter the safety baffle to handle the paper roll, and it is forbidden to have a knife to cut the paper when the equipment is running.

23. When the paper roll is off-track during rewinding, the machine should be shut down for processing. In order to prevent deviations:

(1) Check whether the paper after slitting is stretched tightly when unwinding

(2) Check whether the paper core is deformed, uneven cuts, etc.

(3) Check the ethical meshing of slitting when changing specifications

(4) Check whether the tension of the paper web is uniform. If the tension of the paper web is not good, adjust the longitudinal motor to adjust the paper web-Quanzhou small plate paper slitting and rewinding machine

(5) Increase the wrap angle of the spreading roller and adjust the airbags of the multi-stage rollers so that the paper roll can be produced normally to avoid deviation.